top of page
  • LinkedIn
  • Youtube
Stock Labels

STOCK LABELS

S&N Labels carries a full line of stock labels for all your stock handling applications.  

Stock Labels

We've got the fundamentals handled.

Blank & Flood-coated Labels

S&N Labels provides an extensive array of blank and flood-coated labels suitable for various printers and applications.

Thermal Labels

S&N Labels offers a comprehensive selection of thermal transfer and direct thermal labels, available in a variety of shapes, sizes, on rolls or fanfold formats. Our products are designed to deliver excellent performance for our clients' printers, ensuring outstanding outcomes.

Stock Labels

Gloss Paper Standard

Semi gloss is General labelling from food through to beverages. An over varnish is normally applied (gloss, matt or Satin Varnish ) Paper is not water resistant → an over-laminate can be applied to protect material from moisture. Alternatively, opt for a Polyprop label which is waterproof

Gloss Paper Standard - Fasson Gloss/High Gloss

Fasson Gloss/High Gloss (High Grade Semi Gloss) with a high gloss top sheet is High quality food and beverage labels. Also used for pharmaceutical labels. An over varnish is normally applied (gloss or matt varnish). Paper is not water resistant → an over-laminate can be applied to protect material from moisture. Alternatively, opt for a Polyprop label which is waterproof

Gloss Paper Wine - Cast Gloss

has a top sheet of cast gloss (clay-coated) and is Used predominantly on wine labels. Possesses Wet Strength properties → Label will withstand ice bucket test and not disintegrate. The material is not waterproof

Films - Clear - Gloss Clear Polypropylene

Used mainly for beverages → water proof and no label look

Films - Clear - Clear Polyprop on Clear Backing

No look labels - clear top sheet and backing - used mainly in personal care and cosmetics A much more expensive material (top sheet+adhesive+backing) → used mainly on high-end products

Films - Clear - Gloss Clear Polyethylene

Used mainly for the personal care and pharmaceutical market

Used on products which are squeezed as it is flexible and has properties which allow it to stretch It has. Waterpproof and no label look

Films - White - Cavitated White Polypropylene

Waterproof label → used mainly in the FMCG and FOOD Markets. Be wary of selecting large machine-applicated labels as the material tends to be flimsy. A less expensive alternative to Gloss White Polyprop. It also has a slightly pearlised look.

Films - White - Gloss White Polypropylene

Personal Care, Beverage, pharmaceutical and waterproof labels.

Films White - Gloss White Polyethylene

Used mainly for the personal care and pharmaceutical market. Used on products which are squeezed as it is flexible and has properties which allow it to stretch. Waterproof and no label look.

Films - Metallised - Gloss Metallised Polypropylene

Water proof substrate. Used mainly on personal care products

Thermal Top Paper

Top coated direct thermal with good short term  resistance to oils, fat alcohol etc. Used for thermal transfer printers - Print transferred by heat. Mainly used for scale labels where variable information is require to be printed on each label. (Poultry, Butchery and Dairy Labels)

Thermal Econo

Thinner, less expensive alternative to Thermal SKE. Only used for dry applications. used for simple print (i.e not full colour)

Gloss Metallised Paper

Paper coated with metallised foil. Use for simulating foil or giving a metallic effect.

Metallised Paper - Matt Foil Paper

Wine labels are water-resistant and good for embossing. Vinyl coated with aluminium

Other Paper Facestocks - Semi Gloss Board

Good for embossing. Very rigid. Care must be taken on machine application

Other Paper Facestocks - Semi Gloss Two Layer

Two layers of top sheet → we print on the top layer. Used for promotional labels (Disney & Readers Digest). Once the label is applied - you can peel off the top layer and apply that elsewhere.

Stock Labels

Facestocks

Gloss Paper Standard

Semi gloss is general labelling from food through to beverages. An over varnish is normally applied (gloss, matt or satin varnish). Paper is not water resistant → an over-laminate can be applied to protect material from moisture. Alternatively, opt for a polyprop label which is waterproof.

Gloss Paper Standard - High Gloss

High gloss (High Grade Semi Gloss) with a high gloss top sheet is high quality food and beverage labels. Also used for pharmaceutical labels. An over varnish is normally applied (gloss or matt varnish). Paper is not water resistant → an over-laminate can be applied to protect material from moisture. Alternatively, opt for a polyprop label which is waterproof.

Gloss Paper Wine - Cast Gloss

Has a top sheet of cast gloss (clay-coated) and is used predominantly on wine labels. Label will withstand ice bucket test and not disintegrate. The material is not waterproof.

Films - Clear - Gloss Clear Polypropylene

Used mainly for beverages → water proof and no label look.

Films - Clear - Clear Polyprop on Clear Backing

No look labels - clear top sheet and backing - used mainly in personal care and cosmetics. A much more expensive material

(top sheet+adhesive+backing) 

Films - Clear - Gloss Clear Polyethylene

Used mainly for the personal care and pharmaceutical market.

Used on products which are squeezed as it is flexible and has properties which allow it to stretch It has. Waterpproof and no label look.

Films - White - Cavitated White Polypropylene

Waterproof label → used mainly in the FMCG and FOOD Markets. Be wary of selecting large machine-applicated labels as the material tends to be flimsy. A less expensive alternative to gloss white polyprop. It also has a slightly pearlised look.

Films - White - Gloss White Polypropylene

Personal Care, beverage, pharmaceutical and waterproof labels.

Films White - Gloss White Polyethylene

Used mainly for the personal care and pharmaceutical market. Used on products which are squeezed as it is flexible and has properties which allow it to stretch. Waterproof and no label look.

Films - Metallised - Gloss Metallised Polypropylene

Waterproof substrate. Used mainly on personal care products.

Thermal Top Paper - Premium

Top coated direct thermal with good short term resistance to oils, fat, alcohol etc. Used for thermal transfer printers - print transferred by heat. Mainly used for scale labels where variable information is require to be printed on each label. (Poultry, Butchery and Dairy Labels)

Thermal Economy

Thinner, less expensive alternative to thermal top. Only used for dry applications. Used for simple print (i.e not full colour).

Gloss Metallised Paper

Paper coated with metallised foil. Use for simulating foil or giving a metallic effect.

Metallised Paper - Matt Foil Paper

Water-resistant and good for high-quality prints with metallised inks. Vinyl coated with aluminium.

Other Paper Facestocks - Semi Gloss Board

Suitable where applications does not require adhesive labels.

Other Paper Facestocks - Semi Gloss Two Layer

Two layers of top sheet → we print on the top layer. Used for promotional labels (Disney & Readers Digest). Once the label is applied - you can peel off the top layer and apply that elsewhere. Available in semi gloss | thermal | film.

Adhesives

Removable

Removable adhesive is a general-purpose adhesive used on containers where customers want the label to be easily removable. It provides very good initial tack.

Minimum Application Temp: - 15 ˚C

Service Temperature: - 30 ˚C to 80 ˚C

Acrylic

Acrylic adhesive, while having a lower initial tack compared to Hotmelt, provides excellent adhesion after 24 hours. It is used for products that are hot-filled, such as soups, sauces, and marinades. The adhesive is clear and adheres well to PET and glass bottles but is not recommended for HDPE milk bottles due to the orange peel effect. Acrylic adhesive is also suitable for intricate die shapes and reverse printing.

Minimum Application Temp: + 5 ˚C

Service Temperature: - 20 ˚C to 80 ˚C

Deep Freeze

Deep Freeze adhesive is specifically formulated for application at very cold temperatures, such as commercial freezers, which typically reach much lower temperatures than household freezers. This adhesive is necessary when labels need to be applied to already frozen products and has a high initial tack.

Minimum Application Temp: - 20 ˚C

Service Temperature: - 50 ˚C to  70 ˚C

Hi Tack Hotmelt

Hi Tack Hotmelt adhesive is designed for rough surfaces and contains 25g of adhesive, offering extra adhesion compared to Standard Hotmelt. It is predominantly used on HDPE milk bottles but is significantly more expensive than Standard Hotmelt.

Minimum Application Temp: 0 ˚C

Service Temp: -40 ˚C to 70 ˚C

Standard Hotmelt

Standard Hotmelt adhesive has a high initial tack, making it suitable for difficult applications, including rough surfaces and edges of tubs or containers. It can be used on a variety of surfaces and performs better in slightly damp environments. However, it should not be used for products that are hot-filled, as the labels will fall off.

Application Temp: 0 ˚C to  50 ˚C

 Service Temp: -20 ˚C to 70 ˚C

Adhesives

All of our sticky labels are manufactured using high-quality materials, and we offer a wide range of label materials, adhesives, and finishes to ensure that our customers find the perfect self-adhesive label for their specific application:

  • If you have normal conditions, the acrylic adhesive is an emulsion-based standard label adhesive that will suit your needs.

  • Hot-melt adhesives are rubber-based adhesives suitable for environments where the surface the label is applied to is subjected to normal conditions (not exposed to severe or extreme temperature conditions and free of coatings, dust or fibres).

  • Hi-tack hot melt is an aggressive adhesive that is suitable for environments where a very strong bond is required for surfaces typically exposed to refrigeration.

  • Removable adhesive is ideal for situations where labels are required to be removable (such as for books).

Substrates

We offer different types of material on which to print, including substrates and adhesives. With years of expertise in the labelling industry, we match the substrate with the application, whether you outsource your printing to us, or you have in-house printing facilities. Our fit-for-purpose labels are printed onto semi-gloss, polypropylene, matt, cast gloss, laser, and various grades of thermal transfer materials.

As the blank canvas for your label design, we offer a wide library of paper, boards and synthetic label stock on which we can print. Recycling is an important consideration for S&N Labels and to optimize sustainability, we recommend ensuring that both the label and package can be recycled as a single unit, which necessitates the compatibility of both materials. Recyclable combinations include paper/cardboard, PE/PE and PP/PP.

Standard Materials

We offer a range of standard materials, suitable for a variety of everyday applications, which are available in many combinations.

  • Paper – Semi, Matt and Cast-coated

  • Films – Polypropylene, Polyethylene and MDO

  • Thermal – for labels requiring variable data over-printing using thermal printers

Specialty Papers

We also provide a range of speciality papers that are suitable for a variety of applications, including:

  • Silver metallised paper – for high-quality labels where a metallic finish is required;

  • Paper or synthetic boards ranging from 150 grams upwards, either paper or synthetic;

  • 2-layer piggyback construction materials for special applications.

Environmental Papers

In line with our sustainability drive, S&N Labels offers a range of environmentally-friendly papers that are suitable for a variety of applications. We will work closely with you to source the appropriate paper to suit your application.